Air Dryer Machine and Filters for Compressors in the UAE

Every compressor pulls in humid air, and on a sticky Dubai summer morning that moisture ends up as water in your pipes and spray guns unless you fit an air dryer for compressor lines. A refrigerated air dryer machine cools the compressed air, so the water condenses and drains away, and that protects your pipework from rust and your paint jobs from spotting.

We stock two matching ranges, the MARK MDS series and the ABAC ARD series, from 1,020 l/min on the MDS10 and ARD10 up to 10,500 l/min on the ARD105 and 13,980 l/min on the MDS140. Power draw runs from 220W to 1,400W on a standard 230V single-phase supply, with connections from 3/4" to 2". Both ranges use environment-friendly refrigerant gases, so your compressed air dryer is cheap to run and easy to install.

Filter and sort (0)
Sort by
Clear all
View as
Clear all
1-15 of 15 products
Compare products (0/5)

Picking the Right Compressor Air Dryer

Choose a compressor air dryer rated at or above your compressor's output, then go one size up if your compressor room gets hot, because our summer heat makes any air dryer work harder. Customers often ask us for an air drier or an air dryer filter when they really need both. A compressor filter before the dryer keeps oil and dust out of it, and a dryer filter after it catches fine particles before the air reaches your tools.

Send us your compressor model and we'll match the right air compressor dryer to it, with our Sharjah service center on hand for installation. Arwani has supplied compressed air equipment since 1982, delivery on orders above AED 200 is free, and you can reach our team on +971 56 896 3188.

Frequently Asked Questions

Find answers to common questions about our products and services

An air dryer removes the water vapor that your compressor pulls in with the air. Without one, that moisture condenses in your pipes and tools, which leads to rust, sticky valves and water marks on painted surfaces.
Model for model, the two ranges match on flow and power, so the choice comes down to your compressor. If you run an ABAC compressor, go with the ARD so your service parts come from one brand, and if you run a MARK or another brand, the MDS is a good fit.
Pick a dryer with a flow rating in l/min equal to or higher than your compressor's free air delivery, and add some margin for summer temperatures in your compressor room. If you're unsure, send us the compressor's model plate and we'll recommend the right size.
In most setups, yes. A compressor filter fitted before the dryer protects it from oil and dirt, and a dryer filter fitted after it cleans the air further before it reaches spray guns, tools or production equipment.
Check the condensate drain every week and clean the condenser fins every month or two, more often if your compressor room is dusty. Filter elements are usually changed once a year, and we recommend a full service check before each summer.